DetectorWise Metal detectors compared, specs first
Gear & Rental

Best Pinpointers for Metal Detecting, Land and Water

The best metal detecting pinpointers of 2026 on maker specs: waterproof depth, iron ID, battery, wireless links and October 2026 US prices, land to scuba.

Best Pinpointers for Metal Detecting, Land and Water
The short answer The Garrett Pro-Pointer AT ($109.99, October 2026) is the best pinpointer for most detectorists: waterproof to 6 m, three sensitivity levels and a lost alarm. The Minelab Pro-Find 35 ($99) adds iron tone ID. Pick a pulse induction pinpointer such as the Nokta PulseDive ($229, 60 m) for salt surf and diving.

A pinpointer is a handheld probe that finds the exact spot of a target after your metal detector has found the general area. You cut the plug or start the hole, then sweep the pinpointer through the soil until it beeps or vibrates on the coin, ring or relic. It saves time, keeps holes small and reduces the chance of slicing a find with the digger.

Every spec below comes from the maker or from an authorized dealer’s reproduction of the maker’s spec sheet, and every price is the Serious Detecting US price in October 2026. DetectorWise does not field test gear, so the picks follow from those numbers and the features each maker documents. If you are still choosing the detector itself, the Detector Finder ranks current models against your terrain and budget.

Which pinpointers are best in 2026?

The Garrett Pro-Pointer AT is the best all-round pinpointer, the Minelab Pro-Find 35 is the best value with iron identification, and the Nokta PulseDive is the pick for salt surf and diving. The others fill specific needs: wireless audio, rechargeable batteries or a very low price.

PickModelBest forUS price (Oct 2026)
Best overallGarrett Pro-Pointer ATLand, wet sand, wading$109.99
Best value with iron IDMinelab Pro-Find 35Relic sites, trashy parks$99
Deepest MinelabMinelab Pro-Find 40Same as Pro-Find 35, a little more depth$149
Best for Garrett wirelessGarrett Pro-Pointer AT Z-LynkAT Max, ACE Apex, Vortex owners$129.99
Best for XP detectorsXP MI-6Deus, Deus II, ORX owners$179
Best rechargeable with iron IDQuest XPointer MaxNo 9-volt batteries, iron tone$134.95
Best with a screen and BluetoothNokta AccuPOINTBluetooth headphone users$149 (out of stock when checked)
Best for salt surf and scubaNokta PulseDiveDiving, wet salt sand$229
Best dry-land budget pickGarrett Pro-Pointer IIParks and fields, rain$99.99

How do the top pinpointers compare on specs?

The table puts the main specs on one scale: detection technology, how deep each can go under water, whether it identifies iron, and what powers it.

ModelTechnologyWaterproofIron IDPower and runtimeWireless linkWeightWarranty
Garrett Pro-Pointer ATVLFIP68, 6 m (20 ft)No9 VNone184 g with battery3 years
Garrett Pro-Pointer AT Z-LynkVLFIP68, 6 m (20 ft)No9 VGarrett Z-Lynk184 g with battery3 years
Garrett Pro-Pointer IIVLFIP66, tip only submersibleNo9 VNone198 g with battery3 years
Minelab Pro-Find 35VLF with DIF3 m (10 ft)Ferrous tone9 V, about 30 hNone193 g with battery2 years
Minelab Pro-Find 40VLF with DIF3 m (10 ft)Ferrous tone9 V, up to 20 hNone234 g with battery2 years
XP MI-6VLF, 12 kHz6 m (20 ft)NoRechargeable, 90 hXP Deus, Deus II, ORXn/a2 years
Quest XPointer MaxVLF plus balanced induction5 m (16 ft)Ferrous indicationRechargeable, about 14 hNonen/a2 years
Nokta AccuPOINTn/a3 m (10 ft) per dealerFerrous toneRechargeable, USB-CBluetoothn/an/a
Nokta PulseDivePulse inductionIP68, 60 m (200 ft)NoRechargeableNokta 2.4 GHz headphones above watern/an/a
Quest Scuba TectorPulse induction60 m (200 ft)NoRechargeable, 14 hNone380 g (maker)n/a

“n/a” means the maker or dealer page we checked does not publish that figure; we do not guess.

Why is the Garrett Pro-Pointer AT the best overall?

The Pro-Pointer AT covers the most situations at a fair price. It is waterproof to 6 m (20 ft) under IP68, so it handles wet sand, creeks and wading, and it detects along its sides as well as at the tip, so you can sweep the wall of a hole before homing in with the point.

Garrett gives it three sensitivity levels, a vibrate-only Stealth Mode, a fast retune button that tunes out wet sand or mineralized ground, an LED light and a molded ruler. A lost-pinpointer alarm starts chirping after 5 minutes without a button press, and the unit switches itself off after 60 minutes of chirps. It runs on a 9-volt battery.

Not for: relic hunters who want to hear iron before pulling it out, since Garrett lists no iron tone, and Garrett Z-Lynk owners, who should pay $20 more for the Z-Lynk version. Our Garrett ACE 400 vs AT Pro comparison covers which Garrett detectors carry Z-Lynk.

Why pick a Minelab Pro-Find for iron-heavy sites?

The Pro-Find 35 and 40 give a low tone on iron and a higher tone on everything else, which saves time in holes full of nails. At $99 the Pro-Find 35 is the cheapest waterproof pinpointer here with that feature.

Both are waterproof to 3 m (10 ft), offer five sensitivity levels, audio and vibration, a lost alarm and an LED. Minelab’s DIF (Detector Interference Free) design reduces the falsing a pinpointer can cause on your detector’s coil when it hangs on your belt. The Pro-Find 40 costs $50 more and Minelab says its tuned circuitry gives up to 10 percent more depth than the 35; the 35 runs longer per battery (about 30 hours against up to 20).

Not for: divers, since 3 m is the limit, and anyone who wants a rechargeable battery.

Should you use a VLF or a pulse induction pinpointer?

Use a VLF pinpointer for land, fresh water and most beach work, and a pulse induction (PI) pinpointer for wet salt sand, black sand and scuba. Most pinpointers, including the Garrett and Minelab models, are VLF.

A VLF pinpointer reads conductive wet salt sand and mineralized soil as a faint target, so it chatters until you retune it against the ground. A PI pinpointer sends short pulses and listens for the echo to fade, which makes it largely blind to salt and magnetic minerals. The trade-off is that PI cannot separate iron from other metals. The Nokta PulseDive ($229) doubles as a small scuba detector with a 5.5-inch coil and is rated to 60 m; the Quest Scuba Tector ($179.99) is a dedicated PI probe with the same depth rating. For tide timing and wet-sand technique, see our beach metal detecting guide.

Which pinpointer works with your detector’s wireless headphones?

Any pinpointer works beside any detector, but only some link into your detector’s wireless audio. That link matters if you hunt with headphones on and do not want to pull them off to hear the probe.

  • Garrett Pro-Pointer AT Z-Lynk ($129.99): pairs with one button press to Garrett Z-Lynk receivers such as MS-3 headphones, so detector and pinpointer play in the same headphones.
  • XP MI-6 ($179): links to the XP Deus, Deus II and ORX. The detector shows the MI-6’s sensitivity and battery, switches to standby while the MI-6 is on, and can trigger the MI-6’s alarm to find it even after it has been switched off. The MI-4 ($139) is the same probe without the radio link.
  • Nokta AccuPOINT ($149): pairs over Bluetooth with low-latency headphones and has a color screen; it was out of stock at our reference dealer in October 2026.

Minelab’s Pro-Find range has no wireless link.

How do you stop losing your pinpointer?

Use a bright color, a lanyard and the lost alarm, and make one habit automatic: the pinpointer goes back in the holster before the plug goes back in the hole. A pinpointer is small and usually set down mid-dig, so the usual ways to lose one are leaving it in the grass, burying it while refilling and dropping it in water.

  1. Pick a loud color. Garrett’s orange, Minelab’s yellow (Pro-Find 35) or red (Pro-Find 40) and Nokta’s yellow PulseDive are all easy to spot in leaf litter.
  2. Clip a lanyard from the pinpointer to your belt or pouch. Most of the models above include one.
  3. Leave the lost alarm on. Garrett’s chirps after 5 minutes idle; Minelab, Nokta and Quest models include one too.
  4. Holster before you refill. This one habit prevents most buried pinpointers.
  5. On XP gear, the Deus can call a switched-off MI-6.

Who does not need an expensive pinpointer?

Beginners in dry parks can start with a budget probe, and one-off users looking for a single lost ring may not need one at all. A pinpointer saves time; it does not find targets your detector misses.

The Garrett Pro-Pointer II ($99.99) is rated IP66: it can be rinsed and used in rain, but only the tip should go under water. The Quest XPointer Land ($39.95) is water-resistant, runs about 8 hours on a 9-volt and is the cheapest named-brand probe we found. If you only need a detector and pinpointer for a weekend, a metal detector rental may cover both.

What else do you need to recover targets cleanly?

A pinpointer works with a digger, not instead of one. A serrated hand digger or a narrow shovel cuts the plug, the pinpointer finds the target in it, and a finds pouch keeps trash and keepers separate. Our digging tools guide compares shovels, hand diggers and sand scoops by terrain, and the beginner guide prices a full starter kit.

Fill every hole and leave the turf as you found it, and detect only where the land manager allows it: National Park System units prohibit detecting under 36 CFR 2.1, state park rules vary, and private land needs the owner’s permission. To match a detector to the pinpointer you choose, run the Detector Finder.

Frequently asked questions

Quick answers to what detectorists ask us most

Do I need a pinpointer for metal detecting?

Not strictly, but almost every regular detectorist uses one. A pinpointer finds the target inside the plug or hole, so you dig a smaller hole, damage fewer finds and refill faster. A good one costs about $100 to $150.

What is the best waterproof pinpointer?

For wading and surf, the Garrett Pro-Pointer AT (6 m, $109.99 in October 2026). For scuba, a pulse induction pinpointer such as the Nokta PulseDive, rated to 60 m (200 ft), or the Quest Scuba Tector, also rated to 60 m.

Can a pinpointer tell iron from other metals?

Some can. The Minelab Pro-Find 35 and 40, the Nokta AccuPOINT and the Quest XPointer Max give a different tone for ferrous targets. The Garrett Pro-Pointer AT detects all metals without an iron tone.

Why does my pinpointer beep in wet sand?

Wet salt sand is conductive, and a VLF pinpointer reads it as a weak target. Retune with the tip held against the sand, lower the sensitivity, or use a pulse induction pinpointer, which ignores salt and mineralized ground.

Can I use any brand of pinpointer with my detector?

Yes, any standalone pinpointer works beside any detector. Wireless linking is brand-specific: Garrett Z-Lynk pinpointers pair with Garrett Z-Lynk audio, the XP MI-6 with Deus, Deus II and ORX, and the Nokta AccuPOINT with Bluetooth headphones.