Metal Detecting Shovels, Diggers, and Sand Scoops Compared
Which metal detecting shovel, hand digger or sand scoop fits your ground: blade lengths, materials, scoop hole sizes and US prices checked in October 2026.

The digging tool decides whether a metal detecting hunt leaves a lawn looking untouched or full of torn turf. Detectorists use three classes of tool: short hand diggers for lawns and parks, long serrated shovels for fields and relic sites, and sand scoops for the beach. This page compares current examples of each on blade size, length, material and US price.
DetectorWise does not field test gear. Every dimension below comes from the maker’s or an authorized dealer’s spec listing, and every price is the Serious Detecting street price we saw in October 2026. A pinpointer is the other half of a clean recovery; our pinpointer guide covers those.
Which digging tool do you need for metal detecting?
The right digging tool depends on the ground you hunt, not on the detector you own. Most detectorists end up with two tools: a hand digger on the belt for everyday plugs, and either a shovel or a scoop for their main terrain.
| Where you hunt | Tool class | Typical size | Price range (Oct 2026) |
|---|---|---|---|
| Lawns, parks, yards | Serrated hand digger | 7 to 7.5 in blade, about 12 in overall | $20 to $50 |
| Plowed fields, woods, old homesites | Serrated T-handle or long shovel | 29 to 36 in overall | $50 to $110 |
| Dry sand at the beach | Plastic or short hand scoop | 5 to 9 in basket | $15 to $40 |
| Wet sand and surf | Long-handle stainless or galvanized scoop | 7.5 to 11 in basket, 24 in to 4 ft handle | $39 to $195 |
If you hunt parks and beaches equally, buy the hand digger first and a scoop second. A long shovel is the one tool that only pays off once you hunt fields or rural sites regularly.
What are the best hand diggers for metal detecting?
A hand digger is a short, heavy blade, usually 7 to 7.5 inches long with a serrated edge, that cuts a plug of turf in a lawn or park. It is the first tool most detectorists buy, and the one they use most often.
| Digger | Blade | Overall length | Material | Price (Oct 2026) |
|---|---|---|---|---|
| Nokta Standard Digger | Not stated | Not stated | Polymer | $19.99 with belt holster |
| Nokta Premium Digger | 7.5 in, serrated | Not stated | Stainless steel | $33.99 with holster |
| Garrett Edge Digger | 7.5 in, serrated both sides | 12 in | Carbon steel | $38.99 with belt sheath |
| Lesche Digging Tool | 7 in long, 1.75 in wide, one serrated and one sharp edge | 12 in | Chrome-moly steel | $49.95 with Cordura sheath |
The Lesche costs the most here; it comes in left- and right-serrated versions so the saw edge faces the way you cut, with a smooth sharpened edge on the other side for clean sod lines. The Garrett Edge Digger is the value pick in steel. The polymer Nokta Standard suits soft soil and sand, but it is not a root cutter.
Who these are not for: relic hunters working deep, root-bound ground, where a 7 inch blade means kneeling and prying for every target. That is shovel work.
When do you need a full metal detecting shovel?
You need a shovel when targets sit deeper than a hand digger reaches comfortably or the ground is full of roots, clay and rock: plowed fields, woods, cellar holes and old homesites. Metal detecting shovels are narrow, serrated and usually T-handled so you can push with a boot and pry with both hands.
| Shovel | Overall length | Blade | Material / notes | Price (Oct 2026) |
|---|---|---|---|---|
| Lil’ Digger 29 in | 29 in | 4 x 8 in, double serrated, foot steps | Fiberglass shaft, under 3 lb | $49.99 |
| CKG Double Serrated Shovel | Two-piece, threaded | Serrated both edges | Stainless steel, T-handle | $65.00 |
| Garrett Razor Relic Shovel | 36 in | 9 in, serrated with cutting teeth | Steel, T-handle, made in Garland, Texas | $76.99 |
| Lesche Sampson Pro-Series T-Handle | 31 in | 7.5 in heat-treated edge | Steel, 5-year breakage warranty | $103.95 |
| Lesche T-Handle 36 in | 36 in | Double serrated | Steel, 5-year breakage warranty | $110.25 |
The Garrett Razor Relic is the best price for a full 36 inch shovel. The Lesche models cost more but carry a 5-year warranty against breakage, which matters if you pry in rocky ground. The two-piece CKG breaks down to fit a backpack, useful if you hike in to a site.
Who these are not for: park hunters. A long shovel cuts a bigger hole than a lawn needs and is exactly the tool many city parks do not allow.
Which sand scoop should you buy for the beach?
A sand scoop is a basket with drain holes that lifts a target out of sand or water in one or two passes. Short scoops work in dry sand; long-handled scoops let you recover in wet sand and surf without bending or putting your face in the waves.
| Scoop | Basket | Handle | Holes | Material | Price (Oct 2026) |
|---|---|---|---|---|---|
| Nokta Plastic Sand Scoop | 5 x 5.5 x 8 in | Short | Not stated | Plastic, non-metallic | $14.99 |
| Dune Scoops Galvanized 24 in | 5 x 7.5 in | 24 in, molded grips | 5/8 in round | Galvanized steel | $38.95 |
| CKG Pro Stainless | 8 x 11 x 5 in, 2.38 lb | Pole handle sold separately | Not stated | Stainless steel | $80.00 |
| Nokta Premium Sand Scoop | 9.1 x 6.0 x 4.7 in | Rod set and handle sold separately | 7/16 in, laser cut | Stainless, 3-way adjustable angle | $101.99 |
| CKG Pro Titanium | 11 x 8 in, about 2.2 lb | Pole handle sold separately | Hexagonal | 1.5 mm titanium | $195.00 (out of stock when checked) |
A plastic scoop has one advantage no metal scoop has: you can sweep the detector over it to check whether the target is in the basket, because the scoop itself gives no signal. For wet sand and surf, stainless steel is the long-term choice because salt water corrodes coated steel. Budget about $65 more for a carbon fiber pole, the price of CKG’s handle when we checked. Our beach metal detecting guide explains where on the beach each scoop earns its keep.
What hole size should a sand scoop have?
A scoop’s holes should be smaller than the smallest target you want to keep, and that is a real trade-off against how fast the basket drains. The US dime, the smallest current US coin, is 17.91 mm (0.705 in) across.
| Hole size | In mm | Keeps a dime? | What can slip through |
|---|---|---|---|
| 5/8 in round | 15.9 mm | Yes, about 2 mm to spare | Stud earrings, small charms, thin chains |
| 7/16 in | 11.1 mm | Yes, about 7 mm to spare | Very thin chains, tiny studs |
Larger holes drain wet sand and shell faster, which is why many beach hunters accept them. If you hunt fine sand for small gold jewelry, a smaller or hexagonal hole pattern loses less. Before you dump a basket, run a pinpointer or the detector over the spoil pile.
How do you cut a plug that leaves no trace?
A good plug is a flap of turf that goes back exactly where it came from, with the grass roots still attached. The common method is to cut three sides of a square or horseshoe around the target, angle the blade inward so the plug is wider at the top, and leave the fourth side as a hinge.
- Pinpoint first, so the hole is no bigger than it needs to be.
- Cut three sides about 6 inches across, leaving a hinge of turf.
- Fold the plug back and pile loose soil on a cloth, not on the grass.
- Check the hole and the plug with a pinpointer before digging deeper.
- Return the soil, fold the plug down, and press it flat with your foot.
On dry lawns the turf browns at the cut edges, so watering the spot or hunting after rain makes recovery cleaner. Our beginner metal detector guide includes a starter kit with a digger and pinpointer at three budgets.
Are digging tools allowed where you detect?
Tool rules are set by whoever manages the land, and they vary. Some city and county parks allow small hand tools only, some allow a probe or screwdriver but no digging, and some ban detecting outright. In the United States, possessing or using a metal detector is prohibited in National Park System units under 36 CFR 2.1, and removing archaeological resources from federal or Indian land without a permit is an offense under the Archaeological Resources Protection Act (16 U.S.C. 470ee).
We point to these rules; we do not interpret them for your site. Ask the park office or landowner what tools they allow before you go, and fill every hole whatever the rule.
Does blade material matter?
Blade material matters mostly for rust and edge life. Carbon steel and chrome-moly steel hold a sharp serrated edge in rocky ground but can rust if put away wet. Stainless steel resists rust and is the usual choice for scoops and for anyone hunting near salt water. Galvanized steel is a cheaper coating that resists corrosion until it is scratched through. Titanium is the lightest metal option and does not corrode, at more than twice the price of a comparable stainless scoop ($195 against $80 in the CKG range).
| Material | Strength | Watch out for |
|---|---|---|
| Carbon steel | Holds an edge, cheap | Rust if stored wet |
| Chrome-moly steel | Hard, keeps serrations | Price |
| Stainless steel | Resists salt and rust | Heavier scoops |
| Galvanized steel | Low cost, corrosion-resistant coating | Coating wears with use |
| Titanium | Light, corrosion-proof | Price |
| Polymer or plastic | Non-metallic, will not trigger the detector | Weak in roots and clay |
What does a starter digging kit cost?
A park kit costs about $70, a beach kit about $55, and a relic kit about $160 at October 2026 prices. These are single-dealer examples, not the only good choices. Bundles from one maker often cost a little less than buying the same pieces separately, so compare the bundle price with the parts before you order.
| Kit | Contents | Price (Oct 2026) |
|---|---|---|
| Park and yard | Garrett Edge Digger and All Terrain Dig Pouch bundle | $68.44 |
| Beach, dry and wet sand | Dune Scoops Galvanized 24 in scoop plus Nokta Plastic Sand Scoop | $53.94 |
| Fields and relic sites | Lesche Sampson Pro-Series bundle: shovel, left-serrated digger, holster | $158.50 |
Who should not buy these tools yet?
Skip the long shovel and the stainless scoop if you have not yet hunted more than a few times: a $20 to $40 hand digger covers the first season in parks and dry sand. Skip any digging tool for places where you have not confirmed digging is allowed. And if you only want to find one lost ring in your yard, a borrowed garden trowel and a rented detector will do; our metal detector rental guide covers that case.
Sources: dealer spec listings at Serious Detecting for the Lesche Digging Tool, Lesche Sampson and T-Handle shovels, Garrett Edge Digger, Garrett Razor Relic Shovel, Lil’ Digger, CKG and Nokta scoops and diggers, and the Dune Scoops galvanized scoop (prices checked October 2026); US dime specifications; 36 CFR 2.1; 16 U.S.C. 470ee.
Still choosing the detector that goes with these tools? The Metal Detector Finder ranks current models for your terrain and budget and shows why each one made the cut.
Frequently asked questions
Quick answers to what detectorists ask us most
What is the best shovel for metal detecting?
For fields and relic sites, a serrated T-handle shovel of 29 to 36 inches. The Garrett Razor Relic Shovel (36 in, 9 in blade) cost $76.99 in October 2026; Lesche's 31 and 36 inch T-handles ran $103.95 to $110.25 with a 5-year breakage warranty.
Do I need a shovel or a hand digger?
Start with a hand digger. A 7 to 7.5 inch serrated blade cuts the small, neat plug that lawns and parks call for, and it rides on your belt. Add a shovel only for plowed fields, woods and old homesites where targets are deeper and roots are thick.
What size holes should a sand scoop have?
Smaller than the smallest thing you want to keep. A US dime is 17.91 mm across, so a 5/8 inch (15.9 mm) hole keeps it with about 2 mm to spare, while studs and thin chains can pass through. A 7/16 inch (11.1 mm) hole holds more small jewelry but drains slower.
Can I use a garden trowel for metal detecting?
For a first few hunts, yes. A plain trowel works in soft soil, but it has no serrations for roots and no depth marks, and thin blades bend in clay. A purpose-made serrated digger costs $20 to $50 and cuts cleaner plugs, which matters wherever you need to leave turf undamaged.
Are metal detecting shovels allowed in parks?
It depends on the land manager. Some parks allow only small hand tools or probes, some ban digging, and National Park System units ban detecting altogether under 36 CFR 2.1. Check the rule with the agency that runs the park before you take any tool there.