DetectorWise Metal detectors compared, specs first
Detecting Basics

Metal Detecting Laws: Where It Is Legal in the US

Metal detecting laws by land type: national parks, federal land, state parks, beaches and private land, plus ARPA, the 36 CFR 2.1 ban and getting permission.

Metal Detecting Laws: Where It Is Legal in the US
The short answer Metal detecting is legal on your own land and on most public land with permission, but banned in every US National Park under 36 CFR 2.1. Federal archaeological sites are protected by ARPA, state park rules vary widely, and private land always needs the owner's consent.

Metal detecting is legal almost everywhere in the US with one condition that changes by location: who controls the ground and what rules they attach to it. The device is never the problem. Where you swing it, what you dig, and how old the find is decide whether you are enjoying a hobby or breaking a federal law.

This guide sorts the main land types by whether detecting is allowed, cites the exact rule for each, and explains how to get permission. DetectorWise is not a law firm, rules change, and local ordinances override general guidance, so treat this as a starting point and confirm with the land manager before every hunt.

Yes, owning and using a metal detector is legal in all 50 states. No federal law bans the hobby itself. The limits are on location and on what you remove: federal law protects archaeological and historic items, and each landholder, public or private, sets access rules on top of that.

Two federal laws do most of the work. The Archaeological Resources Protection Act (ARPA) of 1979 protects archaeological resources at least 100 years old on federal and tribal land. The Antiquities Act of 1906 protects historic and prehistoric objects on federal land. Neither bans detecting modern coins and jewelry on land where access is allowed, but both make digging old artifacts a crime.

Where can you legally metal detect?

Permission depends on the land type. The table below covers the common ones in the US, from fully open to fully closed.

Land typeDetecting allowed?Rule to check
Your own propertyYesNone, but call 811 before digging near utilities
Private land (not yours)With owner’s written permissionState trespass law; owner may keep finds
City and county parksVaries by localityMunicipal code or parks department permit
State parksVaries by state and parkState parks regulations; often designated areas or permits
National Park SystemNo, banned36 CFR 2.1(a)(7)
National Forests (USFS)Usually yes for coins and jewelryARPA protects artifacts; developed and protected areas closed
BLM public landUsually yes for coins and jewelryARPA protects artifacts; some areas withdrawn
US Army Corps of Engineers lakesOften yes for coins and jewelry36 CFR 327; artifacts prohibited, check the district
Ocean beachesUsually yes below mean high tideState public-trust doctrine; local permits vary

The pattern is consistent: modern lost items are generally fair game where access is allowed, and anything that could be a century-old artifact is protected on public land.

Why are national parks completely off limits?

National parks ban metal detectors outright. The regulation is 36 CFR 2.1(a)(7), which prohibits “possessing or using a mineral or metal detector” in any unit of the National Park System. That includes national seashores, national monuments, national battlefields and historic sites, not only the large scenic parks.

The reason is preservation. Many park units sit on battlefields, village sites and historic grounds that ARPA and the Antiquities Act protect, and the Park Service treats a detector as evidence of intent to dig. A ranger can cite you for carrying one, even switched off, so leave it in the car. If a beach you want to hunt is a national seashore, it is closed, as our beach metal detecting guide also notes.

Can you detect on other federal land like forests and BLM?

Generally yes for recreational detecting, within limits. The US Forest Service and the Bureau of Land Management both allow hobby detecting for modern coins and jewelry across much of their land, but ARPA still protects any archaeological resource over 100 years old, and digging one is a federal offense.

Avoid developed recreation sites, posted archaeological areas, mining claims you do not own, and any area withdrawn from entry. On Army Corps of Engineers lakes and reservoirs, 36 CFR 327.14 and district-level rules often permit detecting for coins and jewelry on beaches and swim areas while banning the removal of artifacts, so always confirm with the managing office. If you are prospecting rather than coin hunting, our where to find gold guide and meteorite hunting guide cover the extra claim and specimen rules that apply.

What are the rules for state parks and public parks?

State and local park rules are a patchwork, so check each one individually. Some state park systems allow detecting in designated areas with a free permit, some restrict it to swim beaches, and some ban it entirely. City and county parks range from fully open to permit-only to closed.

A quick way to confirm:

  1. Search the park’s name plus “metal detecting policy” or read the municipal code online.
  2. Call the parks and recreation department and ask which areas allow detecting.
  3. Ask whether a permit is required and whether it is free.
  4. Follow the dig rules: most require you to fill every hole and remove any trash you unearth.

Getting this in writing protects you if a groundskeeper questions you later. Parks are the usual first hunting ground for a new detectorist, which is why our beginner detector guide assumes a park as the starting point.

How do you get permission to detect on private land?

Ask the owner directly, explain the hobby in plain terms, and agree how any finds are shared before you dig. Most productive old ground is private, so permission is a skill worth practicing, and a polite, specific request succeeds far more often than detectorists expect.

  1. Identify the owner through county property records or by asking neighbors.
  2. Knock during daylight, introduce yourself, and show the detector and your dig tools.
  3. Explain that you cut neat plugs, fill every hole, and carry out all trash.
  4. Offer to share finds, or to return anything of sentimental value like a lost ring.
  5. Get the agreement in writing if you plan to return often.

A simple finds split, such as the owner keeping anything they want and you keeping the rest, heads off disputes later. Keep a signed note in your pack in case anyone questions you while you are on the land.

What should you never dig or remove?

Never dig human remains or grave goods, and stop at once if you uncover bone or a burial, then report it to local authorities rather than removing anything. On any public land, assume items over 100 years old are protected and leave them in place.

Live ordnance is the other hard rule. Old military shells, blasting caps and cartridges turn up on former ranges and farms, and they can still be dangerous. Do not touch suspected ordnance; mark the spot and call the authorities. For everyday digging, call 811 before you put a tool in the ground anywhere you are unsure what utilities run below.

Who does this guidance not cover?

This page is US-focused and does not replace local legal advice. Detectorists outside the US face different systems. In England, Wales and Northern Ireland, the Treasure Act 1996 requires you to report treasure finds within 14 days. In England and Wales, the Portable Antiquities Scheme records other finds voluntarily, and detecting on a Scheduled Monument without consent is illegal. The Treasure Act does not extend to Scotland, where finds are reported to the Treasure Trove Unit and the Crown claims significant finds. Landowner permission is still essential everywhere.

Inside the US, this guide also does not cover shipwreck salvage, underwater sites in state waters, or mining-claim law, each of which has its own statutes. When the rule is unclear, assume the stricter reading and ask the land manager.

Sources: 36 CFR 2.1 (eCFR), Archaeological Resources Protection Act of 1979 (NPS), Antiquities Act of 1906 (NPS), 36 CFR 327.14 (eCFR), UK Treasure Act 1996 (legislation.gov.uk), Portable Antiquities Scheme.

Still choosing a machine for the parks and beaches you can legally hunt? The Metal Detector Finder ranks current detectors by where you plan to search and your budget.

Frequently asked questions

Quick answers to what detectorists ask us most

Is metal detecting illegal?

No, metal detecting itself is legal across the US. What is restricted is where you do it. National Park System land bans detectors outright, archaeological sites are protected on all federal land, and every piece of private land needs the owner's permission first.

Can you metal detect in a public park?

Often, but not always. City and county parks set their own rules: some allow detecting freely, some require a permit, and some ban it. National parks ban it under 36 CFR 2.1. Call the parks department or read the municipal code before you dig.

What is ARPA in metal detecting?

The Archaeological Resources Protection Act of 1979 protects archaeological resources at least 100 years old on federal and tribal land. Digging or removing them without a permit is a federal crime, with fines and possible jail time, even if you found them with a hobby detector.

Can I metal detect on the beach?

Usually yes on the wet sand below the mean high-tide line, which most states hold in public trust, but national seashores are closed under 36 CFR 2.1 and many towns require a permit or set hours. Check who manages the beach before you go.

Do I need permission to metal detect on private land?

Yes. Entering or digging on private land without the owner's permission is trespassing, and in many states the landowner also owns anything you find. Get spoken or, better, written permission and agree in advance how finds are split.