DetectorWise Metal detectors compared, specs first
Gear & Rental

Metal Detector Coils: DD vs Concentric, Sizes, Shapes

How to choose a metal detector coil: DD vs concentric vs mono, how size changes depth and sensitivity, elliptical vs round, and when a second coil is worth it.

Metal Detector Coils: DD vs Concentric, Sizes, Shapes
The short answer A metal detector coil's type and size decide what it finds. DD coils handle mineralized ground and cover more width; concentric coils pinpoint sharply; mono coils suit pulse induction gold machines. Bigger coils reach deeper on large targets but miss small ones and struggle in trash, so smaller coils win in iron-heavy parks.

The search coil is where a metal detector meets the ground, and swapping it changes what the machine finds as much as any setting. Coil choice comes down to three things: the winding type, the size, and the shape, each of which trades one capability for another.

This guide explains the types, how size changes depth and sensitivity, and when a second coil earns its cost. The detection physics behind coils, including why depth falls off so steeply, is covered in our how metal detectors work guide; here the focus is on choosing one.

What coil types are there, and when do you use each?

There are three main coil types, and each has a home ground. DD coils suit mineralized soil, concentric coils suit mild soil and precise pinpointing, and mono coils belong on pulse induction gold machines.

Coil typeField shapeStrengthWeaknessBest for
DD (double-D)Thin blade, wide and evenHandles mineralization, wide coveragePinpoints along a line, not a pointMineralized ground, most VLF detectors
ConcentricCone, centeredSharp pinpoint, good separationReacts more to mineralizationMild soil, trashy parks, coins
Mono (monoloop)Bowl, deepDepth on gold, used with PINo discriminationPulse induction gold detectors

Most modern VLF detectors ship with a DD coil, because it copes with a wider range of soil. Concentric coils, once standard, now appear mainly as accessory coils for clean ground. Mono coils are specific to pulse induction gold detectors, as our gold detector guide explains.

How does coil size change depth and sensitivity?

A bigger coil reaches deeper on large targets and covers more ground per sweep, while a smaller coil is more sensitive to tiny targets and separates trash better. There is no single best size; you match it to the target and the ground.

The physics is unforgiving. The round-trip signal from a small target under a round coil is proportional to the coil radius to the fourth power divided by the depth term cubed, so enlarging a coil helps depth on big targets but spreads the field and weakens the response to small ones. That is why a 15 inch coil can miss a thin gold chain a 6 inch coil hears clearly.

Coil sizeCoversFinds bestStruggles with
Small (5 to 8 in)Narrow stripSmall targets, trashy groundDepth, open-field speed
Stock (9 to 11 in)MediumAll-round balanceNothing badly; the default
Large (12 to 15 in)WideDeep large targets, open fieldsSmall targets, trash, weight

Should you choose elliptical or round?

Elliptical coils slip between trash and work tight spots; round coils give a slightly more even field and a bit more depth for the same area. The difference is smaller than the type and size choice, so decide it last.

An elliptical coil has a narrow tip that fits between rocks, roots and fence posts, and it is easier to sweep in tight lanes. A round coil of similar area tends to hold target IDs a touch more steadily and pinpoints in a simple circle. Many detectors offer both in their accessory range, and most hunters are well served by whichever shape the stock coil already is.

Does coil choice matter for pinpointing?

Yes, and it is where concentric and DD coils differ most in daily use. A concentric coil pinpoints to a single spot directly under the center, while a DD coil detects along a line down its middle, so you pinpoint by finding the strongest signal along that line.

In practice, detectorists use the detector’s pinpoint mode plus a handheld pinpointer rather than relying on the coil alone. The coil narrows the target to a small area, and the pinpointer finds it in the hole, which keeps the dig small. Our pinpointer guide covers that recovery step, which matters more than coil shape for clean digging.

Can you use any coil on any detector?

No. Coils are brand- and model-specific, because each is tuned to the detector’s operating frequency and uses the maker’s connector and cable. A coil built for one model will not read correctly, or at all, on another, even within the same brand.

Before buying an accessory coil, check the maker’s compatibility list for your exact model. Wireless-coil detectors like the XP Deus series pair the coil electronically, so those coils are even more tightly matched. The brand comparison guide notes which systems use shared versus proprietary coils, and the maker spec page for your detector is the final word.

Which coil comes on most new detectors?

Many new VLF detectors ship with a mid-size DD coil, roughly 9 to 11 inches, because it balances depth, coverage and sensitivity for general hunting. That stock coil is a deliberate all-round choice and suits coins, relics and beaches well enough that many hunters never change it. Not every detector follows that pattern: the Garrett ACE 300 ships with a 7 x 10 inch concentric coil.

Makers then sell accessory coils around it: a small coil for trashy or iron-heavy sites, and a large coil for depth on open ground. Gold detectors vary. Small coils suit small gold, but pulse induction gold machines often ship with mid-size coils: the Garrett Axiom Lite comes with an 11 x 7 inch mono coil, and the US Minelab GPX 6000 with an 11 inch mono and a 14 inch DD.

How do you protect and maintain a coil?

Fit a coil cover, wrap the cable snugly along the shaft, and rinse the coil after salt or muddy hunts. The coil is the part most exposed to wear, and a few cheap habits extend its life and keep it reading cleanly.

  • A skid plate or coil cover takes the scuffing instead of the coil housing.
  • Wrap the cable firmly around the shaft with a little slack at the connector, so it does not tug or snag.
  • After a salt beach or a muddy field, rinse the coil and dry the connector before storing it.
  • Check the connector pins and the cable for cracks, which can cause falsing and dropouts.

A failing cable can mimic a dying detector, with random beeps and unstable IDs, so rule the cable out before blaming the machine.

Can a better coil fix a cheap detector?

Only within limits. A good accessory coil can improve a modest detector’s performance on specific ground, such as a small coil in a trashy park, but it cannot add discrimination, multi-frequency or waterproofing the detector itself lacks. Buy the right detector first, then tune it with a coil rather than expecting a coil to rescue the wrong machine.

Who does not need a second coil?

Most beginners and coin hunters never need to buy an extra coil. The stock coil on a modern detector is a sensible all-round size, and spending on a pinpointer, digger or headphones improves results more than a second coil for the first season or two.

Buy an accessory coil only when you hit a specific wall: a smaller coil for a park so trashy the stock coil blurs targets, or a larger coil for open fields where depth on deep coins and relics is the limit. Gold-nugget hunters are the exception, since small coils are part of the method from the start. To match a detector and its stock coil to the ground you hunt, run the Metal Detector Finder.

Sources: Minelab, Metal Detector Basics and Theory (Bruce Candy), Minelab, coil types knowledge base, Garrett search coils, XP Deus II coils.

Frequently asked questions

Quick answers to what detectorists ask us most

What is the difference between a DD and a concentric coil?

A DD coil has two overlapping D-shaped windings and handles mineralized ground with a wide, even detection field. A concentric coil has rings sharing one center and pinpoints more precisely with a cone-shaped field, but it reacts more to mineralization. DD suits bad soil; concentric suits mild soil.

Does a bigger coil detect deeper?

On large targets, yes, up to a point, and it covers more ground per sweep. But a bigger coil is less sensitive to small targets like thin chains and tiny gold, and it struggles in trash because it sees more objects at once. Match coil size to the target, not just to depth.

What coil is best for small gold nuggets?

A small coil, often elliptical or a small mono coil on a pulse induction gold machine. Small coils concentrate the field and respond better to tiny targets, which is why gold detectors ship with small coils and offer even smaller ones for nugget patches.

Can I use any coil on my detector?

No. Coils are brand- and often model-specific, because they must match the detector's frequency, connector and tuning. Use only coils the maker lists as compatible with your detector; a coil from another brand or an incompatible model will not work correctly.

What size coil is best for a trashy park?

A small coil, roughly 5 to 9 inches. It separates good targets from nearby trash and iron better than a large coil, which blends several objects into one signal. The trade-off is less depth and ground coverage, which rarely matters in a shallow, busy park.