DetectorWise Metal detectors compared, specs first
Brands & Models

White's Metal Detectors: What Happened, Repairs, Used Buys

What happened to White's Electronics, where White's detectors are repaired now and for how much, where the manuals live, and which used models are worth buying.

White's Metal Detectors: What Happened, Repairs, Used Buys
The short answer White's Electronics of Sweet Home, Oregon, founded in 1950, suspended operations on June 18, 2020. Garrett bought its trademarks, intellectual property and tooling that October. White's detectors are no longer made, but Centreville Electronics in Virginia and Oregon still repair them, and Garrett hosts the manuals.

White’s was one of the best-known American metal detector brands for seven decades, and its MXT, Spectra V3i and Coinmaster machines are still swung in parks and fields every weekend. The company is gone, but the detectors, the repair network and the manuals are not. This page covers what happened, where to get a White’s fixed, and whether a used White’s still makes sense against what $300 to $1,000 buys new.

The history below comes from Garrett’s October 2020 acquisition release and Garrett’s own White’s support page. Repair terms and used prices come from the two White’s service centers’ websites, checked in October 2026. DetectorWise has no relationship with any of them.

What happened to White’s Electronics?

White’s Electronics, founded in 1950 by Kenneth and Olive White in Sweet Home, Oregon, suspended operations on June 18, 2020, in a memo to its dealers. On October 20, 2020, Garrett Metal Detectors of Garland, Texas, announced it had acquired White’s trademarks, intellectual property, tooling and other assets. The deal did not include White’s real estate in Oregon or Scotland.

DateEvent
1950White’s Electronics founded by Kenneth and Olive White
2002White’s MXT released at $799
2009Spectra V3i released at $1,349
2016MX Sport, White’s waterproof detector, released at $749
June 18, 2020White’s suspends operations
October 20, 2020Garrett announces it acquired White’s trademarks, IP and tooling
October 2026whiteselectronics.com opens Garrett’s site; Garrett sells the Goldmaster 24k under its own name

Release years and launch prices are from the DetectorProspector model database. A long-time forum administrator there summed up the closure as a company that could not be sustained financially, not one that was simply sold off.

Is White’s still in business?

No, White’s is not in business as a detector maker. The White’s name, patents and tooling belong to Garrett, and the old whiteselectronics.com address now loads Garrett’s website. Garrett has not restarted the White’s coin, relic or beach lines.

One design survives: the Goldmaster 24k, a 48 kHz gold detector that White’s sold before it closed, is now the Garrett Goldmaster 24k at $679.99 on Garrett’s US store (October 2026), with a 6 x 10 inch DD coil and an optional 6 inch concentric. White’s-branded accessories for it, such as the 6 inch concentric coil, still turn up at dealers. For how Garrett’s own lineup compares with Minelab, Nokta and XP today, see our metal detector brands compared page.

Where can you get a White’s detector repaired?

White’s detectors are repaired by Centreville Electronics in Manassas, Virginia, and its sister shop Centreville Electronics Northwest in Lebanon, Oregon. Garrett named both in its acquisition release, Garrett’s White’s support page lists both today, and Centreville says it is contracted to keep repairing White’s detectors in and out of warranty.

Service centerSend fromHours listedContact
Centreville Electronics, Manassas, VAEast of MinnesotaTuesday to Friday, 10 am to 4 pm Easterncentrevilleelectronics.net, 703-367-7999
Centreville Electronics Northwest, Lebanon, ORMinnesota and westTuesday to Friday, 4 pm to 7 pm Pacificcentrevilleelectronicsnw.com

Send the control box, the coil and the battery pack; neither shop needs the rods. The Northwest shop is run by a technician who says he worked in the White’s factory service center for more than 30 years. Centreville’s contract runs “for the next few years” by its own wording, with no end date published, so confirm before you ship.

How much does a White’s repair cost?

Centreville Electronics Northwest lists a free estimate, then $80 labor plus parts and $20 return shipping for an out-of-warranty detector, as of its current site. A coil-only repair is $50 plus $10 shipping. If you decline the repair after the estimate, you can donate the detector for parts or pay to have it shipped back.

RepairPrice listed
EstimateFree
Out-of-warranty detector$80 labor + parts + $20 return shipping
Coil only$50 + $10 shipping
Declined after estimateDonate for parts or pay return shipping

Shipping to the shop is on you. Centreville’s Manassas site notes that packing the detector yourself and mailing it saves money over a shipping store. So the floor for an out-of-warranty fix is $100 before parts and the cost of shipping it in, a useful number to weigh against a new detector at $199 to $300.

Where can you find White’s manuals and parts?

Garrett hosts a White’s Manuals and Repair page on garrett.com with manuals for models from the Coinmaster series and Classic series to the DFX and GMT. Serious Detecting also lists free digital manuals for the MXT Pro, Spectra V3i, Spectra VX3, MX Sport, MX5, M6, TDI Pro, TDI SL and the Treasure Master and Treasure Pro.

Parts are thinning out. In October 2026 Serious Detecting still listed a White’s 8 AA battery holder for the DFX, XLT, MXT and M6 at $19.15, a wall charger for the DFX, XLT and MXT at $24.90, a 9.5 inch Sport concentric coil at $149.90 and a 6 x 10 inch Sport DD coil at $179.90, while many other White’s coils showed out of stock. Aftermarket coils from CORS are made to fit White’s detectors. Centreville also sells parts through its own sites.

Which used White’s detectors are worth buying?

A used White’s is worth buying only if it works, comes with a coil and battery pack, and costs well below a new detector with similar ability. These are the White’s models buyers ask about most, with their published specs.

ModelTechnologyReleasedLaunch priceWaterproofWeight
MXT / MXT Pro14 kHz single-frequency VLF2002 (MXT)$799 (MXT), $823 (MXT Pro)NoAbout 4.3 lb
Spectra V3i2.5, 7.5 and 22.5 kHz, singly or all three at once2009$1,349NoAbout 4.2 to 4.5 lb, by source
MX Sport13.9 kHz single-frequency VLF2016$749Yes, 10 ft (IP68)About 4.23 lb
TDI seriesPulse inductionNot compared hereNot compared hereNot compared hereNot compared here
Goldmaster 24k48 kHz VLF gold detectorBefore 2020Now sold new by Garrett at $679.99Coils waterproof3.0 to 3.4 lb (Garrett figure)

Real used prices vary by condition. One benchmark with a warranty: Centreville Electronics’ own used stock page (updated May 2026) listed a White’s Spectrum at $395, a Quantum XT at $325 and a TDI Pulse Scan at $950, each with a one-year warranty. Private sales without a warranty should cost noticeably less.

What should you check before buying a used White’s?

Check the parts that fail with age and are hardest to replace now: the coil, the cable and the battery system. A detector that powers on but has a cracked coil can cost more to fix than it is worth.

  1. Power it on with fresh batteries, run a factory reset as the manual describes, and confirm the display has no dead segments.
  2. Sweep a coin, a nail and a piece of foil over the coil and check the target ID moves between them.
  3. Inspect the coil housing for cracks and the coil cable for nicks near the connector and the coil ears.
  4. Open the battery compartment and look for corrosion on the contacts and the penlight holder.
  5. Ask whether the charger and any rechargeable pack come with it; a White’s wall charger costs $24.90 new.
  6. Download the manual first from Garrett’s White’s page and check the model’s features match what is for sale.

If anything fails, price the repair: a free Centreville estimate, then $80 labor plus parts and $20 return shipping.

What are the modern equivalents of White’s detectors?

Each popular White’s model has a current replacement that is lighter, usually waterproof and under warranty. Prices are October 2026 US street prices.

If you likedModern equivalentWhyPrice
MXT / MXT Pro (14 kHz all-rounder)Garrett AT Pro or Minelab X-Terra ProAT Pro: 15 kHz, submersible to 3 m. X-Terra Pro: 5, 10, 15 kHz and an 8 kHz beach mode, submersible to 5 m$459.99 / $289
Spectra V3i (multi-frequency, deep menus)Minelab Equinox 900 or Nokta LegendSimultaneous multi-frequency, submersible to 5 m, about 1.3 kg$999 / $599
MX Sport (waterproof single frequency)Minelab X-Terra ProSubmersible to 5 m against 10 ft, about 1.3 kg$289
TDI (pulse induction)Garrett Axiom or Minelab GPX 6000Current pulse induction gold detectors with warranty$3,199.99 / $6,999
Goldmaster GMT / 24KGarrett Goldmaster 24k or Minelab Gold Monster 1000The same 48 kHz design new, or a 45 kHz auto-tracking alternative$679.99 / $1,199

The Garrett models are the natural next step for White’s owners who want an American brand; our Garrett ACE 400 vs AT Pro comparison covers that lineup. Owners of a V3i who want the closest multi-frequency experience should read our Equinox 800 vs 900 page. TDI owners moving to a current deep-ground gold machine can compare the Axiom, GPX 6000 and GPZ 7000 in our GPX 6000 vs GPZ 7000 vs Axiom comparison.

Should you buy a used White’s or a new detector?

For most buyers, a new detector is the better buy. Current entry and mid-range machines weigh about 1.2 to 1.4 kg (2.6 to 3.1 lb), against about 4.2 to 4.5 lb for the MXT, V3i and MX Sport, and most are fully submersible with a 3-year warranty. A new Minelab X-Terra Pro costs $289; a used White’s plus one repair can cost as much without the warranty.

A used White’s makes sense in three cases: you already own White’s coils and accessories, you know and like a model’s audio and menus, or it is offered working for well under $200. Otherwise start from our best metal detectors list.

Who is this page not for?

This page is not for collectors valuing vintage White’s machines; collector prices follow rarity and condition, not detecting ability, and we do not track them. It is also not repair advice: White’s electronics are best left to the service centers, because opening a control box can make a repairable fault worse.

Sources: Garrett acquisition release, October 20, 2020, Garrett White’s Manuals and Repair page, Garrett Goldmaster 24k, Centreville Electronics, Centreville Electronics Northwest repair costs, DetectorProspector: White’s MXT Pro, Spectra V3i, MX Sport, Serious Detecting White’s parts and manuals. Checked October 2026.

Ready to replace an old White’s? The Metal Detector Finder ranks current models against your budget, terrain and weight limit, and shows why each one was picked.

Frequently asked questions

Quick answers to what detectorists ask us most

Is White's Metal Detectors still in business?

No. White's Electronics suspended operations on June 18, 2020, and Garrett Metal Detectors bought its trademarks, intellectual property and tooling in October 2020. The whiteselectronics.com address now opens Garrett's website.

Who repairs White's metal detectors now?

Centreville Electronics in Manassas, Virginia, and Centreville Electronics Northwest in Lebanon, Oregon, the service centers Garrett named in its 2020 acquisition notice. Ship to Virginia from east of Minnesota and to Oregon from Minnesota westward.

How much does a White's detector repair cost?

Centreville Electronics Northwest lists free estimates, then $80 labor plus parts and $20 return shipping for an out-of-warranty detector, and $50 plus $10 shipping for a coil-only repair. Check the current terms before you ship.

Does Garrett still make White's detectors?

Not under the White's name. Garrett sells the Goldmaster 24k, a gold detector White's launched before it closed, as the Garrett Goldmaster 24k at $679.99 (October 2026). The coin and beach lines such as the MXT, V3i and MX Sport ended in 2020.

Is a used White's MXT still worth buying?

Only cheaply and only if it works. The MXT is a 14 kHz detector from 2002 that weighs about 4.3 lb and is not waterproof. A new Minelab X-Terra Pro at $289 is lighter, submersible to 5 m and carries a 3-year warranty.