Best Waterproof Metal Detectors for Surf, Lakes, and Rivers
Waterproof, submersible or salt-capable? The best underwater metal detectors by depth rating, plus headphones that work under water. Prices October 2026.

“Waterproof” on a metal detector box can mean three different things, and only one of them lets you put the whole detector under water. This guide sorts the current models by what they can actually do in water, compares their published depth ratings, and covers the part buyers often miss: headphones, because the wireless set in the box usually stops working the moment it gets wet.
Specs come from Minelab, Garrett, Nokta and XP spec sheets. Prices are US street prices from Serious Detecting and Garrett’s store, checked in October 2026. DetectorWise does not field test detectors; picks are argued from published numbers.
What does “waterproof” actually mean on a metal detector?
A waterproof metal detector is one of three things: a detector with only a waterproof coil, a fully submersible detector rated to a stated depth, or a salt-capable detector that also finds targets reliably in seawater. The first lets you search puddles and shallow edges. The second lets you wade and snorkel. The third is what you need for ocean surf.
| Level | What can go under water | Typical rating | Examples |
|---|---|---|---|
| Coil-only waterproof | The coil (and sometimes the lower shaft) | Coil to 1 m; control box rainproof or not weatherproof | Garrett ACE 300 and ACE 400, Minelab Vanquish 340, Garrett ACE Apex (coil and lower shaft) |
| Fully submersible | Coil, shaft and control box | IP68, maker states 3 m or 5 m | Garrett AT Pro (3 m), Minelab X-Terra Pro (5 m), Nokta Simplex Lite (5 m) |
| Salt-capable submersible | As above, plus stable in wet salt sand and surf | Submersible plus simultaneous multi-frequency, PI or a dedicated beach mode | Minelab Equinox 900, Nokta Legend, XP Deus II, Garrett Vortex VX9 |
IP68 means dust-tight and protected against continuous immersion under conditions the manufacturer specifies, so the depth figure always comes from the maker. Treat it as a limit, not a target.
Which waterproof metal detectors are best in 2026?
The Minelab Equinox 900 is the best waterproof metal detector for most people, the Minelab X-Terra Pro is the best budget choice, and the XP Deus II with remote is the only mainstream detector rated deeper than 5 m.
| Pick | Model | Submersible to | Salt water | US price (Oct 2026) |
|---|---|---|---|---|
| Best overall | Minelab Equinox 900 | 5 m (16 ft) | Multi-IQ plus Beach 1 and 2 modes | $999 |
| Best value multi-frequency | Nokta Legend WHP | 5 m (16 ft) | Multi-frequency plus Beach mode | $599 |
| Best budget | Minelab X-Terra Pro | 5 m (16 ft) | 8 kHz beach mode | $289 |
| Cheapest submersible multi-frequency | Nokta Score | 5 m (16 ft) | Multi-frequency | $329 |
| Best Garrett | Garrett Vortex VX9 | 5 m (16 ft) | Multi and Multi-Salt modes | $599.99 |
| Best for deeper water | XP Deus II (RC) | Coil and remote 20 m (66 ft) | FMF multi-frequency, beach programs | $1,399 |
| Best for fresh water on a budget | Garrett AT Pro | 3 m (10 ft) | Single 15 kHz; weaker on wet salt sand | $459.99 |
How deep can each waterproof metal detector go?
Most fully submersible detectors are rated to 5 m (16 ft), Garrett’s AT series to 3 m (10 ft), and the XP Deus II coil and remote to 20 m (66 ft). The table lists the maker’s figure for each current model.
| Model | Depth rating (maker) | Weight | Technology |
|---|---|---|---|
| XP Deus II (RC) | Coil and remote 20 m; WS6 headphones rainproof only | from 0.75 kg | SMF (FMF) |
| Minelab Equinox 700 | 5 m | 1.27 kg | SMF (Multi-IQ) |
| Minelab Equinox 900 | 5 m | 1.27 kg | SMF (Multi-IQ) |
| Minelab Manticore | 5 m | 1.3 kg | SMF (Multi-IQ+) |
| Minelab X-Terra Pro | 5 m | 1.3 kg | Selectable VLF |
| Minelab X-Terra Elite | 5 m | 1.3 kg | SMF or 15 kHz |
| Minelab Vanquish 360 | 5 m | 1.16 kg | SMF (Multi-IQ) |
| Minelab Vanquish 560 | 5 m | 1.26 kg | SMF (Multi-IQ) |
| Nokta Legend | 5 m | 1.3 kg | SMF |
| Nokta Legend 2 | 5 m | 1.2 kg | SMF |
| Nokta Score | 5 m | 1.2 kg | SMF or 15 kHz |
| Nokta Simplex Lite and Ultra | 5 m | 1.2 kg | VLF 15 kHz |
| Nokta Gold Kruzer | 5 m (its wireless headphones are not waterproof) | 1.4 kg | VLF 61 kHz |
| Garrett Vortex VX9 | 5 m | 1.38 kg | SMF or single frequency |
| Garrett AT Pro | 3 m | 1.4 kg | VLF 15 kHz |
| Garrett AT Max | 3 m | 1.4 kg | VLF 13.6 kHz |
| Garrett AT Gold | 3 m | 1.37 kg | VLF 18 kHz |
| Minelab Equinox 800 (discontinued) | 3 m | 1.34 kg | SMF (Multi-IQ) |
The discontinued Equinox 800 was rated to 3 m against 5 m for its successors, one of the changes covered in our Equinox 800 vs 900 comparison.
Why is the Minelab Equinox 900 the best waterproof detector?
The Equinox 900 ($999) is the best waterproof detector because it is fully submersible to 5 m and runs simultaneous multi-frequency with two dedicated Beach modes, so the same machine works in a lake, a river and the salt surf. It also offers Park, Field and Gold modes for dry land, single frequencies from 4 to 40 kHz, and two coils (11-inch and 6-inch). It weighs 1.27 kg.
The ML85 wireless headphones in the box are not for submerged use, so budget $170 for Minelab’s waterproof headphones if you will put your head under. Who it is not for: freshwater-only waders on a budget, who can get 5 m submersion for $289 with the X-Terra Pro, and divers going past 5 m.
What is the best budget waterproof metal detector?
The Minelab X-Terra Pro ($289) is the best budget waterproof detector. It is IP68 to 5 m, has an 8 kHz beach mode for salt and 5, 10 and 15 kHz for fresh water and land, offers manual and tracking ground balance, and carries a 3-year warranty. It weighs 1.3 kg with its 12 x 9 inch coil and supports low-latency wireless audio.
As a selectable single-frequency detector, it is steadier in salt than a plain single-frequency VLF but noisier than a simultaneous multi-frequency machine in the wet sand and surf. If salt beaches are your main ground, the Nokta Score ($329) or Nokta Legend ($599) are the step up; our X-Terra Pro vs Nokta Legend comparison weighs that choice.
Which metal detector goes deepest under water?
The XP Deus II with remote (RC, $1,399) goes deepest of the mainstream detectors: XP rates its coil and remote IP68 to 20 m (66 ft). It runs XP’s FMF simultaneous multi-frequency or 49 single frequencies from 4 to 45 kHz, weighs from 750 g, and carries a 5-year warranty.
Two cautions. First, the cheaper Deus II WS6 Master ($799) uses the WS6 headphones as the controller, and those are only rainproof, so it is not a diving build. Second, you need waterproof audio: XP’s BH-01 bone-conduction headset is rated IP68 to 20 m. Below that depth you are in dedicated scuba detector territory, such as the Nokta PulseDive ($229), a handheld pulse induction scuba detector.
Why does salt water need multi-frequency or pulse induction?
Salt water needs multi-frequency or pulse induction because wet salt sand and seawater conduct electricity, and a single-frequency VLF detector reads that conductive ground as a large, shifting signal. The result is falsing, jumpy target IDs and lost depth, worst in the wet sand zone and the surf.
Simultaneous multi-frequency detectors compare several frequencies at once and separate the salt signal from targets. Pulse induction largely ignores conductive ground. Selectable single-frequency machines with a beach mode, such as the X-Terra Pro at 8 kHz, sit in between. In fresh water, none of this applies, and any submersible detector works. Our beach metal detecting guide covers settings and sand zones.
Which headphones work under water?
Only wired waterproof headphones or a submersible bone-conduction headset work under water, because Bluetooth and other 2.4 GHz wireless audio is absorbed by water. Most detectors in this guide ship with wireless or land headphones, so check before your first snorkel.
| Headphones | Fits | US price (Oct 2026) |
|---|---|---|
| Garrett Submersible Headphones | AT Pro, AT Max, AT Gold, ATX, Infinium LS, Sea Hunter | $149.99 |
| Minelab Waterproof Headphones | Equinox series and Manticore | $170 |
| Nokta Waterproof Headphones | Legend, Score, Simplex, FindX Pro, Gold Kruzer | $84.99 (out of stock when checked) |
| Killer B Thresher (third party) | Minelab Equinox, Manticore, X-Terra; Nokta version also sold | $165 to $169 |
| XP BH-01 bone conduction | Deus II | rated IP68 to 20 m by XP |
Prices are from Serious Detecting, October 2026.
What else do you need for water hunting?
You need a submersible pinpointer and a long-handled sand scoop. The Garrett Pro-Pointer AT ($109.99) is rated to 20 ft (about 6 m), enough for any 5 m detector; our pinpointer guide covers the alternatives, including PI models for salt. A sand scoop with holes sized for rings rather than coins speeds up recovery in the surf; see our digging tools guide.
A finds pouch that closes, a lanyard on the pinpointer and a bright coil cover are cheap insurance. Anything you drop in moving water is usually gone. A magnet will not bring back a lost ring either, since gold and silver are not magnetic; our magnet fishing kits guide covers what a magnet can recover.
How do you care for a waterproof metal detector?
Rinse the detector in fresh water after every salt or sandy hunt, then dry it before opening any battery door or charging port. Inspect the seals and O-rings your manual names, keep sand out of shaft locks and connectors, and never open a battery compartment while wet.
Stay within the maker’s depth rating, and follow the manual on charging lithium batteries, especially in hot cars. Corrosion on connectors and failed seals cause most water damage, and a warranty may not cover damage from ignoring the manual.
Who does not need a waterproof metal detector?
You do not need a fully submersible detector if you only hunt dry parks, yards and fields. A coil-only waterproof model such as the Minelab Vanquish 340 ($199) handles dew, wet grass and puddles. You also do not need a 20 m rating unless you snorkel or dive; for wading to the waist, 3 to 5 m is plenty.
Before you hunt any beach or lakefront, check who manages it: National Park System units, including national seashores, prohibit metal detectors under 36 CFR 2.1(a)(7), and state and local rules vary.
The Metal Detector Finder applies these rules for you: tick “surf and snorkel” and it drops anything rated below 3 m, tick “saltwater wet sand” and it flags single-frequency machines.
Sources: Minelab Equinox 900 specs, Minelab X-Terra Pro specs, Minelab Manticore specs, XP Deus II specs, Nokta Legend specs, Garrett Vortex VX9, Garrett Pro-Pointer AT, 36 CFR 2.1.
Frequently asked questions
Quick answers to what detectorists ask us most
What is the difference between a waterproof and a submersible metal detector?
Many detectors sold as waterproof only have a waterproof coil, meaning the coil can go under water but the control box cannot. A fully submersible detector has a sealed control box too, and the maker states a depth, usually 3 m (10 ft) or 5 m (16 ft).
Can you use a waterproof metal detector in salt water?
You can submerge any fully submersible detector in salt water, but finding targets there is another matter. Wet salt sand and seawater are conductive, so single-frequency VLF detectors give unstable signals. Simultaneous multi-frequency or pulse induction handles salt far better.
Do wireless headphones work under water?
No. Bluetooth and similar 2.4 GHz wireless audio is absorbed by water, so once your head goes under you need wired waterproof headphones or a submersible bone-conduction set such as XP's BH-01.
How deep can a waterproof metal detector go?
Most fully submersible land-and-water detectors are rated to 5 m (16 ft), Garrett's AT series to 3 m (10 ft), and the XP Deus II coil and remote to 20 m (66 ft). Coil-only waterproof detectors are typically rated to 1 m for the coil alone.
Do I need to rinse my metal detector after the beach?
Yes. Rinse it in fresh water after salt water or sand, dry it before opening any battery or charging port, and check the seals your manual lists. Salt left in joints and connectors is the most common cause of corrosion.